|
WaveCon Parfil page 2 |
|
BAND-STOP NARROWBAND
STEPPED IMPEDANCE BAND-PASS
INTERDIGITAL OPEN STUB IN/OUT
WIDE-BAND BAND-STOP
COAXIAL LOW-PASS
SHORTED STUB BAND-PASS |
|
MORE FILTERS WHICH MAY BE DESIGNED WITH Parfil |
|
TAPPED PARALLEL CPLD
TRANSFORMER PAR. CPLD
LOW-PASS WITH ZEROS
GAP-COUPLED HIGH-PASS
INTERDIGITAL SHORT IN/OUT
HAIRPIN PAR CPLD IN/OUT |
|
Vary Parameters and see results immediately |
|
FILTER RESPONSE TYPES Designs for Chebychev, Butterworth or Flat Group Delay responses may be computed for any ripple and up to 17 sections.
TUNE CAPABILITY A tuning screen may be accessed for changing parameters such as even and odd mode impedances or tap point location.
TAPPED INPUT DESIGNS Filter size may be reduced by tapping directly into the input/ output parallel coupled lines.
VARY INTERNAL IMPED This capability gives control over line widths or rod diameters.
SPECIAL CAPABILITY for ROUND ROD FILTERS Round rod Interdigital or Combline filters have additional design choices as selecting equal rod diameters, choosing side wall or end wall distances.
FREQUENCY RESPONSE Frequency response is computed including loss, return loss, group delay or S-Parameters. Also, an S-Parameter file may be created.
GRAPHICS CAPABILITY Frequency response or the drawing of the filter may be displayed on your monitor or plotted or saved to a file. You may also save to a Windows Metafile or create a bitmap on your clipboard for pasting into a document as Microsoft Word.(T) |